|
It's very easy to custom-fit an earset to
any ear or face.
- First, locate the 90-degree bend in the tubing
immediately above the earset's cable connection. That 90-degree bend
is designed to tuck perfectly in the small pocket underneath and
behind the earlobe.
- With one hand, place the 90-degree bend into
the pocket and hold it in place. With the other hand, guide the
earpiece around and above the ear.
- Still holding the 90-degree bend with one
hand, position your other index finger between your head and the ear,
and sweep your finger along the tubing starting at the 90-degree bend
and finishing above and immediately in front of the top of the lobe.
When your finger reaches the top of your ear, carefully pinch the spot
to mark your place. Then take off the earset and add a 30-degree bend
at the pinch mark.
- Clip the earset over the ear again - the
earpiece should be perfectly molded to the ear, feeling snug and
comfortable.
- Next, look at yourself in a mirror and mold
the tubing to the contour of your cheek. Although the omnidirectional
E6i is extremely forgiving, the ideal position for the mic is
1/4" behind the corner of your mouth.
- If the mic extends more than 1/2" away
from the mouth, you will need to add another bend. At the top of the
earpiece, bend the tubing downward so it runs alongside the temple,
parallel to the sideburn, for the excess distance.
- Finally, make another 30-degree bend at that
point and fit the rest of the boom to the curve of the cheek for a
perfect fit.
|
